CONTACT US

Dynatec specializes in extensive industrial reverse osmosis (RO) membrane systems and nanofiltration (NF) membrane systems to remove soluble components of wastewater that may not have been removed by primary treatment. In most cases, the purified water can be reused.

RO is capable of rejecting soluble constituents of aqueous streams, such as:

This process is commonly used to purify water and remove salts and other impurities. It can be used to purify fluids such as ethanol, which will pass through the reverse osmosis membrane, while rejecting other ions and contaminants from passing.

 

Industrial Reverse Osmosis/Nanofiltration systems

The most common use for reverse osmosis is in purifying water. It is used to produce water that meets the most demanding specifications. This differs significantly from other RO systems that are often only designed to treat potable water. Our system is specifically designed to accommodate:

RO and NF Technology

RO uses a membrane that is semi-permeable, allowing the fluid that is being purified to pass through it, while rejecting the contaminants that remain. Most NF and RO systems are operated in crossflow to allow the membrane to continually clean itself.

Integrated clean-in-place (CIP)

The membrane skid has an integrated CIP system on the skid. This is especially important for wastewater reuse systems because the cleaning frequency of the skid is often higher than in other RO applications. With an integrated CIP system, cleaning is fast and easy, minimizing the operator’s time.

For more information on using RO or NF technologies for your project, please contact us today.

https://www.dynatecsystems.com/technologies/recovery-and-reuse/

Your Partner for Industrial Wastewater

Dynatec is an industry leader in providing membrane bioreactors and wastewater membrane
systems since 1978 in industrial and municipal applications.

Get Started

Fill out the form below and a Dynatec representative will contact you.