Brewery, Distillery, Winery wastewater treatment systems designed and built by Dynatec Systems
Complete wastewater purification and reuse systems
- Cooling tower makeup
- Irrigation (especially applicable to wineries)
- Boiler feed
- Cleaning and other plant processes
Brewery, distillery, winery wastewater treatment solutions
- Ultrafilter (UF) for removal of non-soluble contaminants
- Membrane Bioreactor (MBR)
- Conversion of existing biological systems to MBR
- To expand capacity
- To improve effluent quality
- MBR for treatment and wastewater reuse
- Reverse Osmosis (RO) for high purity wastewater reuse
- MBR for biological treatment
Contaminants Removed
- Suspended Solids
- Alcohol
- Sugars
- Ammonia
- Phosphorous
- Copper
- Biochemical Oxygen Demand (BOD)
- Chemical Oxygen Demand (COD)
- Dissolved Solids
- Acids
- Phenol
Technology Benefits – Membrane Separation System Using Tubular UF membranes
- Simple mechanical process
- Consistently high-quality water produced
- Ability to reuse purified water
- Low operating costs
- Unattended operation
- Skidded components reduce space requirements
- Ability to remotely monitor and control
- Cell phone and iPad compatible
The MBR configuration has proven to be optimal for treatment of many industrial wastewaters when treatment efficiency is an important consideration.
The MBR is the ideal bioreactor configuration for treatment of organic or inorganic contaminants present in industrial wastewaters. MBRs operate at a higher efficiency while achieving consistent design performance objectives. This makes MBR a more cost effective method of treatment when performance and tank requirements are considered.
Bioreactor systems such as the conventional activated sludge system, sequencing batch reactor system and trickling filters are typically designed for operation at a lower volumetric removal rate, requiring larger tanks and more space. These conventional systems often experience upsets that inhibit settling and therefore require much more operator attention than a membrane bioreactor.
The MBR has proven to be optimal for treatment of many industrial wastewaters because it is less susceptible to upsets. The MBR’s performance is not affected by changes in sludge settleability like the conventional systems, making MBR a wise choice for industrial systems that have more difficult to treat waste streams. Dynatec has over 42 years experience in dealing with difficult to treat industrial wastewaters using membrane filtration.
For more information on your wastewater process, please contact us today.