Dynatec has provided complete wastewater reuse system solutions that provide cooling tower make up water. These systems are deployed across dozens of industries with greatly varying wastewater characteristics.
Cooling tower solutions
- Membrane Bioreactor (MBR) biological treatment for soluble organic removal
- Ultrafiltration (UF) for removal of insoluble contaminants
- MBR for wastewater reuse
- UF and Reverse Osmosis (RO) for high purity reuse
- MBR and RO for high purity water reuse
- Complete Turnkey system solutions
- Conversion of existing biological systems to Membrane Bioreactor (MBR)
Contaminants Removed
- Oil and Grease
- Metals
- PCB’s
- Inks
- Pigmented dyes
- Latex
- Suspended Solids
- Biochemical Oxygen Demand (BOD)
- Chemical Oxygen Demand (COD)
- Phosphorus
- Hardness
- Dissolved Solids
- Bacteria
- Viruses
The MBR is the ideal bioreactor configuration for treatment of organic or inorganic contaminants present in industrial wastewaters. MBRs operate at a higher efficiency while achieving consistent design performance objectives. This makes MBR a more cost effective method of treatment when performance and tank requirements are considered.
Bioreactor systems such as the conventional activated sludge system, sequencing batch reactor system and trickling filters are typically designed for operation at a lower volumetric removal rate, requiring larger tanks and more space. These conventional systems often experience upsets that inhibit settling and therefore require much more operator attention than a membrane bioreactor.
The MBR has proven to be optimal for treatment of many industrial wastewaters because it is less susceptible to upsets. The MBR’s performance is not affected by changes in sludge settleability like the conventional systems, making MBR a wise choice for industrial systems that have more difficult to treat waste streams. Dynatec has over 42 years experience in dealing with difficult to treat industrial wastewaters using membrane filtration.
For more information, contact us today.
https://www.dynatecsystems.com/technologies/recovery-and-reuse/