Aerospace wastewater treatment systems have been provided successfully to a number of facilities including:
- Aerospace bearings manufacturers
- Aircraft engine manufacturers
- Aerostructures manufacturers
- Aircraft component manufacturers
Aerospace wastewater treatment systems solutions
- MBR biological treatment for soluble organic removal
- Ultrafiltration (UF) for removal of insoluble contaminants
- MBR for water reuse
- Complete turnkey system solutions
- MBR and Reverse Osmosis (RO) for high purity water reuse
- Conversion of existing biological systems to MBR
Dynatec Systems has provided complete purification and reuse system solutions to many aerospace firms for:
- Cooling tower makeup
- Boiler feed
- Plant processes
Contaminants Removed
- Metals
- Oils
- Dye Penetrant
- Biochemical Oxygen Demand (BOD)
- Chemical Oxygen Demand (COD)
- Suspended Solids
- Dissolved Solids
The MBR configuration has proven to be optimal for treatment of many industrial wastewaters when treatment efficiency is an important consideration.
The MBR is the ideal bioreactor configuration for treatment of organic or inorganic contaminants present in industrial wastewaters. MBRs operate at a higher efficiency while achieving consistent design performance objectives. This makes MBR a more cost effective method of treatment when performance and tank requirements are considered.
Bioreactor systems such as the conventional activated sludge system, sequencing batch reactor system and trickling filters are typically designed for operation at a lower volumetric removal rate, requiring larger tanks and more space. These conventional systems often experience upsets that inhibit settling and therefore require much more operator attention than a membrane bioreactor.
The MBR has proven to be optimal for treatment of many industrial wastewaters because it is less susceptible to upsets. The MBR’s performance is not affected by changes in sludge settleability like the conventional systems, making MBR a wise choice for industrial systems that have more difficult to treat waste streams. Dynatec has over 42 years experience in dealing with difficult to treat industrial wastewaters using membrane filtration.
For more information, please contact us today.