Nutrient removal applications that meet or exceed effluent quality requirements are ideally suited for Dynatec’s membrane bioreactor (MBR) systems.
Biological Nutrient Removal (BNR) Process
The BNR of nitrogen from wastewater in activated sludge:
- Nitrification
- Denitrification
- Phosphorus precipitation and removal
These processes require specific conditions in the activated sludge to occur; Membrane Bioreactors (MBR)s are better able to achieve and maintain those conditions than other systems.
Colloidal Removal
Dynatec’s reliable MBR systems use 0.03 micron ultrafiltration to remove all colloidal particles.
Phosphorus Removal
Dynatec’s efficient systems use ultrafiltration (UF) membranes to remove even the smallest colloidal particles of phosphorus which allows systems to produce an effluent containing less than 0.1 mg/L of total Phosphorus (P).
Membrane Bioreactor
The industrial MBR is the ideal bioreactor configuration for treatment of organic or inorganic contaminants present in industrial wastewaters. MBR’s operate at a higher efficiency while achieving consistent design performance objectives. This makes MBR a more cost effective method of treatment when performance and tank requirements are considered.
Industrial Membrane Bioreactors Benefits:
- Higher flux
- Lower costs
- Better membranes
- Improved permeate quality
- Less operator attention and maintenance
Dynatec’s industrial MBR is the ideal biological treatment system for industrial wastewaters. It is designed to handle high strength wastewater containing high concentrations of:
- Biochemical Oxygen Demand (BOD)
- Chemical Oxygen Demand (COD)
- Oil & Grease (FOG)
- Volatiles
- Metals
- Ammonia
- Nitrate
- Inorganic
The performance is not affected by changes in sludge settleability like the conventional systems, making it the wise choice for industrial systems that have difficult-to-treat waste streams. Dynatec’s MBRs can effectively handle wastewater streams that would otherwise be toxic or inhibitory to other biological treatment systems.
For more information on your application, please contact us today.
https://www.dynatecsystems.com/technologies/recovery-and-reuse/