Poultry processing wastewater treatment systems designed by Dynatec Systems. Poultry plants can produce wastewater with high Biochemical Oxygen Demand (BOD) and Chemical Oxygen Demand (COD) as well as total suspended solids (TSS). The wastewater comes from plant processes and cleaning operations. Major contributors to the organic contaminant load are fat and blood.
Dynatec has provided cost effective systems that can meet the most stringent discharge or reuse requirements.
Dynatec Systems has the products and experience to provide wastewater solutions in the poultry processing industry for treatment and reuse.
Solutions
- MBR biological treatment
- Ultrafilter (UF) for removal of non-soluble contaminants
- MBR
- For surcharge reduction
- Water reuse
- To improve quality of existing system discharge
- To expand capacity of existing system
- Conversion of existing biological systems to Membrane Bioreactor (MBR)
- MBR for treatment and water reuse
Poultry Wastewater Treatment Systems – Contaminants Removed
- Biochemical Oxygen Demand (BOD)
- Phosphorous
- Suspended solids
- Chemical Oxygen Demand (COD)
- Fats, Oils and Grease (FOG)
The MBR configuration has proven to be optimal for treatment of many industrial wastewaters when treatment efficiency is an important consideration.
The MBR is the ideal bioreactor configuration for treatment of organic or inorganic contaminants present in industrial wastewaters. MBRs operate at a higher efficiency while achieving consistent design performance objectives. This makes MBR a more cost effective method of treatment when performance and tank requirements are considered.
Bioreactor systems such as the conventional activated sludge system, sequencing batch reactor system and trickling filters are typically designed for operation at a lower volumetric removal rate, requiring larger tanks and more space. These conventional systems often experience upsets that inhibit settling and therefore require much more operator attention than a membrane bioreactor.
The MBR has proven to be optimal for treatment of many industrial wastewaters because it is less susceptible to upsets. The MBR’s performance is not affected by changes in sludge settleability like the conventional systems, making MBR a wise choice for industrial systems that have more difficult to treat waste streams. Dynatec has over 42 years experience in dealing with difficult to treat industrial wastewaters using membrane filtration.
For more information, please contact us today to discuss your application.
https://www.dynatecsystems.com/technologies/membrane-bioreactors-and-reuse/