Wastewater treatment system for an aerostructures manufacturer provided by Dynatec Systems. The system removes heavy metals and produces water for reuse. Dynatec Systems also provided a double pass reverse osmosis (RO) system to produce low conductivity/low Total Dissolved Solids (TDS) water (less than 3mg/l) for the metal finishing process in lieu of a deionizing system. The RO system was much more cost effective in processing the relatively high TDS water supply.
Dynatec specializes in extensive reverse osmosis (RO) membrane systems and nanofiltration (NF) membrane systems to remove soluble components of wastewater that may not have been removed by primary treatment. In most cases, the purified water can be reused.
RO is capable of rejecting soluble constituents of aqueous streams, such as:
- Bacteria
- Salts
- Sugars
- Proteins
- A wide range of organics and colors
- Improves the color, taste and properties of the fluid
This process is commonly used to purify water and remove salts and other impurities. It can be used to purify fluids such as ethanol, which will pass through the reverse osmosis membrane, while rejecting other ions and contaminants from passing.
Reverse Osmosis/Nanofiltration systems
The most common use for reverse osmosis is in purifying water. It is used to produce water that meets the most demanding specifications. This differs significantly from other RO systems that are often only designed to treat potable water. Our system is specifically designed to accommodate:
- Minimize reject volume
- Variable characteristics
- Minimize fouling
For more information on a wastewater treatment system to remove heavy metals and produce water for reuse, please contact us today.