|
|
May 1, 2003 -
Washington, D.C. The EPA issued a final rule
under the CWA technology-based effluent limitations guidelines for
metal products and machinery point source category. The metal products
and machinery point source category includes facilities that
manufacture, rebuild, or maintain metal products, parts, or machines.
The final rule applies to facilities that directly discharge
wastewaters from oily operations (as defined under 40 C.F.R. Section
438.2[f]) and manufacture, maintain, or rebuild metal parts, products
or machines used in aerospace, aircraft, bus and truck, electronic
equipment, hardware, household equipment, instruments, mobile
industrial equipment, motor vehicles, office machines, ordnance,
precious metals and jewelry, railroad, ships and boats, stationary
industrial equipment, and miscellaneous metal products. The final rule
is effective on June 12, 2003. For More Information. Visit the MP&M web site at http://www.epa.gov/ost/guide/mpm.
Contacts.
Dynatec Systems Inc.
909 Jacksonville Road
Burlington, NJ 08016
609-387-0330 voice
609-397-2060 fax
www.dynatecsystems.com |
NEWS
Dynatec Provides Ultrafiltration System for Thermophilic MBR
Dynatec Helps Ford’s Mexico Auto Plant Meet Water Conservation Goals
Dynatec Completes MBR WTF for GEMA
Dynatec Completes Saddle Ridge MBR WTF
Steel Mill Uses UF to Treat Oily Wastewater
General Mills Orders Water Treatment System
Dynatec Designs Water Treatment System for NYC Helena Building
New DynaLift MBR System
MP&M Update
ZLD System in Brazil
 to
News & Info page
|
